SUPERGRIT® Safety Treads
Supergrit Features:
NAVSEA TREADS
| SAFETY TREADS IN COLORS Time-Proven Supergrit safety treads are now available in colors for improved aesthetics. |
 |
- Extruded aluminum base—abrasive filler
- Lengths to order, up to 12'-0" (3.66 m) max. in one piece
- Non-combustible
- High content of aluminum oxide abrasive
- 12 standard colors
- Colors extend throughout filler
- Protective tape available
Supergrit Treads Provide...
A heat treated, corrosion resistant, extruded
aluminum base with satin/lacquered finish. The use of
diamond-hard aluminum oxide in the filler assures long
tread life under heavy pedestrian traffic use. Supergrit is
designed for both inside and outside use.
SUPERGRIT SPECIFICATIONS
Provide Supergrit type ________ safety nosings as manufactured by Wooster Products Inc. For interior and exterior stairs.- Nosing base to be type 6063-T5 extruded aluminum.
- Anti-slip filler shall contain not less than 65% virgin grain Aluminum Oxide (AL2O3) /Silicone Carbide (Sic) abrasive
- Nosings shall be non-combustible as tested under Federal Test Method Standard No. 501a, Method 6411.
- Type of anchor shall be as specified.
- Nosings shall terminate not more than 4" (101.6 mm) from ends of steps for poured concrete stairs; for concrete filled pan stairs, nosings shall be full length of steps less 1/8" (3.05 mm) clearance.
- Color shall extend uniformly throughout the filler; black color will be furnished if no other color is specified.
Nosings shall finish flush with the top of the traffic surface.
Click Type For Supergrit Approval Sheet
| 121 | 122 | 131 | 132 | 133 | 138 |
| 141 | 142 | 161 | 231BF | 232 | 238 |
| 241BF | 242 | 431 | 610 | ||
| FT3-NG | M231BF-NG | XT3-NG | |||
NAVSEA TREADS